Your house file
Six sheets: where the shutoffs are, what every system is, the ranked job list, what you spent, your meter readings, and what you reported to a landlord or an association. Seeded from your setup; everything you type stays in this browser.
Four of these six sheets are essential on a first pass: Shutoffs, Systems and equipment, the ranked job list, and, once anything has been done, the upkeep log. The other two wait for a reason to exist: the meter sheet starts when you run your first leak test, and the reported sheet matters only where somebody else owns part of the building. A reader who skips the first four loses the thing this manual is actually for, which is a plan built from their own house rather than from a generic list.
Everything here stays in this browser. Nothing is uploaded, and the only way any of it leaves the device is if you export it from the house file export page or print it.
Shutoffs
One row per shutoff or isolating valve. Write where it is in words somebody else could follow in the dark, and put a date in Tested on only after you have turned it.
Systems and equipment
One row per major system or appliance. Leave Expected life years blank where you could not establish an age; a blank reads as unknown here, not as zero. Annual set-aside comes from the reserve calculator and is summed in the printed house file.
The ranked job list
One row per job. Start it from the walk-through with no tier at all, then come back and rank it. Leave Estimated cost blank until you have a figure; a blank reads as not answered, not as free.
The upkeep log
One row per thing done, read or booked. This is the sheet that turns into your own evidence: a dated filter change beats any published interval, and a dated reading beats any memory of one.
Water meter readings
Two readings with nothing running, and the hours between them, are the whole leak test. Copy the gallons a day figure out of the leak calculator rather than working it out here.
What you reported, and what was promised
For a job somebody else owns. One row per report, with the date, who you told, what you said and what they promised, in their words rather than yours.
How to use these sheets
- One row per thing, named so somebody else could find it. "Basement, northwest corner, on the wall above the laundry tub" is a row. "The basement" is not. The person who needs the shutoffs sheet may be a house sitter or a neighbor, and they will be reading it in a hurry.
- Record, do not conclude. On the systems sheet, Make, Model, Serial, Installed and Where it is hold what you observed; Expected life years, Publisher, Replace by and Annual set-aside hold what you worked out and from whose figure. On the ranked job list, Job and What it protects are observations; Tier, Who does it and By when are decisions. Keeping them apart is what lets you revisit a decision in a year without redoing the observation.
- A blank is an answer on three of these sheets. Expected life years, Estimated cost and Cost are set up so that a blank reads as not answered rather than as zero, and the totals say how many rows were left blank. Use the blank rather than a guess; a guess written down becomes a fact in six months.
- Write the word unknown where you mean unknown. Not "about 2010". What wears out and when has the procedure for an unknown age, and it depends on the row actually saying so.
- Date everything you can. A dated filter change outranks any published interval, a dated humidity reading outranks an impression, and a dated report to a landlord outranks a memory of having mentioned it.
- Print the shutoffs sheet and put it in a kitchen drawer. It is the one sheet whose value is that somebody who is not you can read it.
Which chapter fills which sheet
| Sheet | Started in | Used again in |
|---|---|---|
| Shutoffs | Walk your house | The quick start, and any day something is leaking |
| Systems and equipment | Walk your house | What wears out and when, What upkeep costs, Choosing and keeping appliances |
| The ranked job list | Walk your house, unsorted | The priority rule, which ranks it, and Hiring help, which works its top row |
| The upkeep log | Heating, cooling and hot water | Air, moisture and insulation for humidity readings, Alarms, vents and tests for alarm dates |
| Water meter readings | Keeping water out | Twice a year, as a trend rather than a reading |
| What you reported | The priority rule, if somebody else owns part of the building | Hiring help, where it is the record FTC's complaint order asks for |
If your sheets came pre-filled with a few rows, those came from your setup: a row for each system you told us you have, and the shutoffs that go with it. The names are filled in and everything else is blank on purpose, because the make, the model, the date and the location have to be read off your own equipment. Seeding only ever fills a sheet that is still empty, so nothing you type is ever rewritten.
In this manual's examples, Ray and Diane Okonkwo's systems sheet carries four rows: a 2009 gas furnace and air conditioner from an installer's sticker, a 2016 water heater from a data plate, and a roof whose Installed column reads "unknown" with "previous owner said approximately 2011" in the notes. Tomas Lindqvist, who rents, has two rows on the reported sheet and almost nothing on the others, which is the correct shape for his situation rather than a thinner version of somebody else's.
These sheets record what you observed, what you were told, and what you decided. They are not a permit, a contract, an inspection report, a diagnosis or a certification. Where a row holds an answer from an authority or a professional, the record is yours and the answer is theirs, which is why the columns ask who said it. The sheets also live in one browser: they are cleared if you clear site data, they are empty in private browsing, and they do not move between devices on their own. Export from the house file export page whenever you have typed something you would hate to lose.